Характеристики и описание
General specifications | |
|---|---|
| Signal type | Analog input |
Supply | |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Rated voltage | 20 ... 30 V DC bus powered via Termination Board |
| Ripple | within the supply tolerance |
| Rated current | ? 22 mA |
| Power dissipation/power consumption | 0.7 W max. |
Input | |
| Connection side | field side |
| Connection | SL2: 5a(+), 5b(-) |
| Input resistance | ? 1.4 M? |
| Transmission range | 0 ... ± 500 mV |
| Offset voltage/current | ? 5 µV / ? 5 nA |
Output | |
| Connection side | control side |
| Connection | SL1: 8a(+), 7a(-) |
| Load | Accuracy figures for infinite load impedance. Additional 0Или отправьте нам запрос наsistance of 10 k? |
| Voltage | 0 ... ± 500 mV |
| Output resistance | max. 3 ? |
| Line fault detection | input: ± 700 mV output: ± 1 V |
Fault indication output | |
| Connection | SL1: 6b |
| Output type | open collector transistor (internal fault bus) |
| Fault voltage | < Vcc/2 (when connected to Vcc via 10 k? pull up resistor) |
Transfer characteristics | |
| Absolute | < 0.25 K at 30 V voltage supply |
| Bandwidth | DC to > 350 Hz (-3 dB) |
| Settling time | < 1 ms |
| Rise time/fall time | < 100 µs |
Indicators/settings | |
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
Directive conformity | |
| Electromagnetic compatibility | |
Conformity | |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Degree of protection | IEC 60529:2001 |
Ambient conditions | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
| Degree of protection | IP20 |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mounting | on Termination Board |
Data for application in connection with hazardous areas | |
| EU-Type Examination Certificate | BASEEFA 10 ATEX 0031X |
| Certificate | BASEEFA 10 ATEX 0032X |
| Directive conformity | |
International approvals | |
| UL approval | |
| IECEx approval | IECEx BAS 10.0012X IECEx BAS 10.0013X |
General specifications
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
Доставка
Оплата и гарантии